User manual

The display shows ‘Channels Select’ . Press [ENTER], then use [UP] and [DOWN] to select the
number of DMX channels to be used by the device. Control via 4, 9, 14 or 26 channels is avail‐
able.
When the display shows the desired value, press [ENTER] to conrm the setting and then
[DOWN] to proceed to the next menu item. To change the menu item without making any
changes, press [MODE].
The display shows ‘DMX Break’ . Press [ENTER], then use [UP] and [DOWN] to select a certain
behaviour for the device in case of interrupted DMX connection. Choose ‘Hold’ if you want the
device in that case to maintain the state that corresponds to the last received DMX signal.
Choose ‘Hold’ if you want the device in that case to perform an automatic run. Choose ‘Sound’
if you want the device in that case to perform a sound-controlled automatic run. Choose
‘Sound’ if you want the device in that case to return to its home position.
When the display shows the desired value, press [ENTER] to store the setting and then twice
[MODE] to return to the function selection. To change the menu item without making any
changes, press [MODE].
Selecting the number of DMX
channels
DMX break
Operating
32
PicoWash 40Z Pixel Quad
Moving Head