User manual

Press, if necessary repeatedly, [DOWN] and conrm with [ENTER] to call up the menu item
‘Motor Set’ . This function allows you to specify whether the LEDs light up in DMX mode during
the movements of the device head or not.
The display shows ‘Motor Set’ . Press [ENTER] to select the function ‘Move Blackout’ and conrm
with [ENTER]. Then use [UP] or [DOWN] to select ‘ON’ and press [ENTER] to enable this function
(LEDs ‘o’ on DMX-controlled movements). Select ‘OFF’ and press [ENTER] to disable this func‐
tion (LEDs ‘on’ on DMX-controlled movements).
Press, if necessary repeatedly, [MODE] until the display shows ‘Motor Set’ again.
Press, if necessary repeatedly, [DOWN] and conrm with [ENTER] to call up the menu item
‘Motor Set’ . This function allows you to invert the Pan and Tilt movement direction.
The display shows ‘Motor Set’ . Conrm with [ENTER]. Press [UP] or [DOWN] until the display
shows ‘Motor Calibrate’ . Conrm with [ENTER]. Now you can use [UP] or [DOWN] to choose
between ‘Pan Motor’ (reversing the direction of rotation) and ‘Tilt Motor’ (reversing the direc‐
tion of inclination). Press [ENTER] when the desired option is displayed and then press [UP] or
[DOWN] until the display shows ‘Reverse’ . Conrm with [ENTER]. Use [UP] or [DOWN] to select
‘Yes’ to reverse the direction, or ‘No’ to not reverse the direction. Conrm with [ENTER].
Motor Set
Inverting Pan / Tilt
Operating
44
PicoWash 40 Pixel Quad LED
Moving Head