User manual

Press, if necessary repeatedly, [DOWN] and conrm with [ENTER] to call up the menu item

‘MICSense’ . Use this function to specify the sensitivity of the built-in microphone for sound-

control.

Use [UP] and [DOWN] to select the desired sensitivity and conrm with [ENTER].

Press, if necessary repeatedly, [DOWN] and conrm with [ENTER] to call up the menu item

‘Clear Display’ . Use this function to specify whether you want the display to be always bright or

if it should dim out after approx. 25 seconds. When the display is dimmed, press any button to

restore full illumination.

Use [UP] and [DOWN] to select ‘Always On’ if the display should always light up bright. Choose

‘Delay O’ if the display should dim out after approx. 25 seconds. Conrm with [ENTER].

Microphone sensitivity

Clear Display

Operating

PicoWash 40 Pixel Quad LED

Moving Head