User manual

7.2.2 Scene menu
Press [DOWN] while ‘Addr:XXX NoSignal’ is ashing in the display to select the scene ‘Red
Alone’. Press [ENTER] twice to open the Scene menu and to change scene parameters as
desired.
With [UP] and [DOWN] you can select the menu items explained in the following table; press
ENTER to call up the respectively connected function. Use [UP] and [DOWN] to change the
respectively indicated value. When the display shows the desired value press [ENTER] to save
the settings. With [MODE], you get to the parent menu level.
Display Description Value range
Dimmer Overall intensity of all 4 LEDs 0 (low) – 255 (high)
Strobe Strobe frequency 10 (slow) – 255 (fast)
Operating
34
PicoWash 40 Pixel Quad LED
Moving Head