User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
.
The display shows . Press [ENTER] to display the time in minutes since the last power-up.
Press [ENTER] to clear the display.
Press [DOWN]. The display shows . Press [ENTER] to display the entire elapsed operating
hours. Press [ENTER] to clear the display.
The function is only relevant for the customer service.
Press [MODE] repeatedly until the display shows again.
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
. Use this function to specify whether you want the display to appear normally or verti‐
cally inverted. This makes reading the display easier when the device is installed upside down.
Use [UP] and [DOWN] to select ‘on’ if the display should appear inverted. Select ‘oFF’ if the
display should not appear inverted. Conrm each time with [ENTER].
Operating hours counter
Display inverting
Operating
PicoSpot 45
43
Moving Head