User manual

7.3 Settings menu
In this menu you can congure the device according your liking. All previous settings are
retained even when you switch the device o and disconnect it from the mains. Press [MODE]
and conrm with [ENTER] to open the settings menu .
Press [ENTER] to call up the rst menu item . With this function, you can reset the device
to its factory default setting. All your previously adjusted settings are thereby irretrievably
erased.
If you want to enable this function use [UP] and [DOWN] to select ‘on’ and conrm with
[ENTER]. If you want to disable this function use [UP] and [DOWN] to select ‘oFF’ and conrm
with [ENTER].
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item .
Use this function to reset positions and colours to their respective programmed parameters.
If you want to execute this function use [UP] and [DOWN] to select ‘on’ and conrm with
[ENTER]. If you do not want to execute this function select ‘oFF’ and conrm with [ENTER].
Resetting to factory defaults
Reset Machine
Operating
PicoSpot 45
39
Moving Head