User manual

Press [DOWN]. The display shows . Press [ENTER], then use [UP] and [DOWN] to set a value

between 000 and 255 for the gobo shape of the light eect.

When the display shows the desired value press [ENTER] to store the setting. To change the

menu item without making any changes, press [MODE]. Press [MODE] twice to return to the

function selection.

7.2.3 Programme menu

Press repeatedly [DOWN] while ‘A001’ is ashing in the display to select one of the 7 preprog‐

rammed shows ‘PrG1’ to ‘PrG7’ . Press [ENTER] twice to open the Programme menu and to

change show parameters as desired.

Gobo

Operating

PicoSpot 45

Moving Head