User manual

The display shows ‘dISP’ . Press [ENTER], then use [UP] and [DOWN] to select whether you want
the display to show the DMX address of the device ( ‘Addr’ ) or the DMX value for the current
channel ( ‘VALu’ ).
When the display shows the desired value, press [ENTER] to store the setting and then twice
[MODE] to return to the function selection. To change the menu item without making any
changes, press [MODE].
7.2.2 Scene menu
Press [DOWN] while ‘A001’ is ashing on the display to call up the preprogrammed scene.
Press [ENTER] twice to open the Scene menu and to change scene parameters as desired.
Display
Operating
PicoSpot 45
33
Moving Head