User manual

The display shows ‘Addr’ . Press [ENTER], then use [UP] and [DOWN] to adjust the rst DMX
channel to be used by the device (DMX address) in a range from 001 to max. 508.
When the display shows the desired value, press [ENTER] to conrm the setting and then
[DOWN] to proceed to the next menu item. To change the menu item without making any
changes, press [MODE].
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
5 channels 504
9 channels 508
11 channels 502
DMX address
Operating
PicoSpot 45
31
Moving Head