User manual

8 Remote control
To use the remote control, point its infrared diode at the infrared sensor on the unit and press
the desired buttons. The maximum operating distance is about 9 m. The device will only
respond to the remote control signals if it is not controlled via DMX.
To enable the operation via remote control, press [STAND BY] on the remote control uand then
[FULL ON].
1 [STAND BY]
Stops the automatic mode and blackouts the unit. The display shows ‘StoP’ . In this
mode, the device responds to the remote control.
2 [Dimmer + / –]
Adjusts the light intensity between 0 and 100 %. Press [Dimmer +] repeatedly or keep
the button pressed to increase the light intensity. Press [Dimmer–] repeatedly or keep
the button pressed to decrease the light intensity.
3 [SOUND OFF]
Deactivates the sound-control.
ö
#
$
%
&
'
(
)
*
+
,
Remote control
PicoSpot 20 LED
55
Moving Head