User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item

. Press [ENTER] again, the display shows . Use [UP] and [DOWN] to select and

press [ENTER]. This function allows you to specify whether the Pan/Tilt movements should be

inverted.

Press [ENTER] to call up the function. Use [UP] and [DOWN] to call up ‘PAN’ or ‘TILT’ and press

[ENTER]. Select the menu item ‘rEV’ to set the desired value for the inversion with ‘no’ or ‘yes’ .

Press [MODE] repeatedly until the display shows again.

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item .

Here you can assign the scene currently performed by the device to the memory location for

the scene .

Press [ENTER] twice. The display shows ‘no’ . Press [UP] or [DOWN] and conrm the display ‘Yes’

with [ENTER] to save the scene. This will overwrite the previously saved parameters for this

scene.

Press [MODE] repeatedly until the display shows again.

Inverting Pan / Tilt

Recording scenes

Operating

PicoSpot 20 LED

Moving Head