User manual

The display shows . Press [ENTER] and then use [UP] and [DOWN] to adjust a value

between 000 and 255 for the duration for which the head should remain in each programmed

position before it moves to the next.

When the display shows the desired value press [ENTER] to store the setting. To change the

menu item without making any changes, press [MODE].

Press [DOWN]. The display shows . Press [ENTER], then use [UP] and [DOWN] to set a value

between 000 and 255 for the light intensity of the show.

When the display shows the desired value press [ENTER] to store the setting. To change the

menu item without making any changes, press [MODE].

Press [DOWN]. The display shows ‘Strobe’ . Press [ENTER], then use [UP] and [DOWN] to set a

value between 010 and 255 for the strobe frequency of the show. Values between 000 and 009

have no function here.

When the display shows the desired value press [ENTER] to store the setting. To change the

menu item without making any changes, press [MODE]. Press [MODE] twice to return to the

function selection.

Speed

Dimmer

Strobe

Operating

PicoSpot 20 LED

Moving Head