User manual

Symptom Remedy
The unit does not work, no light,
the fan does not run
Check the mains connection and the main fuse.
No response to the DMX con‐
troller
1. Check the DMX connectors and cables for proper con‐
nection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside
to high voltage cables that may cause damage or inter‐
ference to DMX interface circuits.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
46
PicoBlade FX 4x10W RGBW
Moving Head