User manual

Main menu Menu level 2 Menu level 3 Menu level 4 Meaning
‘Key Lock’ Key lock 30 seconds after last keystroke
‘ON’ Switching on
When the key lock is activated, press successively
[MODE], [DOWN], [UP] and [ENTER] to unlock the
keys.
‘OFF’ Turning o
‘Information’ Device information
‘LED ’ ‘Date’ Date of production
‘Time’ Time of production
‘UseHours’ Operating hours counter
‘ThisTime ’ Time since last powering on the device in minutes
‘TotlTime ’ Total elapsed operating time in hours
‘Clear Total ’ ‘YES’ Reset previous operating time to zero.
Use [UP] and [DOWN] to enter the password to
delete the entire elapsed operating time. Upon
delivery, the password is ‘001’ .
‘NO’
‘Motor Set’ Behaviour on DMX-controlled motion
‘Move BlackOut ’ ON LED ‘o’ on DMX-controlled motion
OFF
‘Motor
Calibrate ’
Calibration of the motors for rotation, inclination
and prism.
Use [UP] and [DOWN] to enter the password for cali‐
bration. Upon delivery, the password is ‘001’ .
‘Pan1Motor’ …
‘Pan4Motor’
‘Origin’ Home position pan axis
‘HalfStep’ Half turn pan axis
‘Test’ Test run pan axis
‘Reset’ New calibration pan axis
‘Reverse’ Reverse of the pan axis
‘Tilt1Motor’ …
‘Tilt4Motor’
‘Origin’ Home position tilt axis
‘HalfStep’ Half turn tilt axis
‘Test’ Test run tilt axis
‘Reset’ New calibration tilt axis
‘Reverse’ Reverse of the tilt axis
‘Prism1Motor’ …
‘Prism4Motor’
‘Origin’ Home position prism
‘HalfStep’ Half turn prism
Operating
moving head
16