User manual

Main menu Menu level 2 Menu level 3 Menu level 4 Meaning

‘DMX menu’ ‘DMX Addr’ Setting the DMX address

‘001…512’

‘Channels Select’ Selecting a DMX mode

‘15CH ’ 15-channel DMX mode

‘16CH ’ 16-channel DMX mode

‘26CH’ 26-channel DMX mode

‘46CH’ 46-channel DMX mode

‘DMX fail’ Device behaviour on DMX signal failure

‘Stop ’ Stop and take starting position

‘Hold ’ Retaining last settings

‘Auto ’ Performing an automatic run

‘Sound ’ Performing a sound-controlled automatic run

‘ShowMode

Master’

‘ShowMode

Menu’

Selecting an automatic mode

Movement ‘1’ … ‘4’ Movement pattern 1 to 4

MoveSped ‘000…255’ Running speed of the movement pattern

Color ‘1’ … ‘14’ Colour eect 1 to 14

ColoSped ‘000…255’ Running speed of the colour eect

‘Sound Master’ Sound control

‘Set Menu’ ‘Reload Default’ Resetting the device to factory defaults

‘Yes’ Perform

‘No’ Don't perform

‘Reset Machine’ Reset positions and colours to the respectively programmed parameters

‘Yes’ Perform

‘No’ Don't perform

‘Master’ Master and Stand-alone operation

‘Yes’ Device works as a master and controls further

devices

‘No’ Device works in stand-alone mode

‘MICSense’ Microphone sensitivity for sound control

‘00’ … ‘99 ’

‘Back Light’ Automatic display shutdown when not in use

‘ON ’ Display remains on

‘OFF ’ Display is dimmed after about 25 seconds

Operating

Mr. Beam 120 W