User manual

7 Operating

7.1 Starting the device

CAUTION!

Risk of injury due to movements of the device

The head of the device can move quickly (pan, tilt) and can produce

very bright light. This is also valid immediately after you turn on the

device, when the device operates in automatic mode or under remote

control and when you turn o a DMX controller that is connected to the

device. Persons staying near the device could be injured or frightened.

Before you turn on the device and during the operation, always ensure

that nobody stays close to the device. If work has to be performed in the

area of movement or in the near vicinity of the device, it must remain

turned o.

Connect the device to the power supply to start operation. After a few seconds, the

fans start to work and the head moves to the home positions for rotation (pan) and

inclination (tilt).

7.2 Main menu

Press [UP] or [DOWN] to select the various submenus within a menu level. Press

[ENTER] to open the submenu shown on the display. Conrm the changed values

with [ENTER]. To return to the next higher menu level, press [MODE].

The following table shows the setting options.

Operating

moving head