User manual

In sound control mode, the LED eect lights are controlled by bass pulses transmitted through
the built-in microphone.
1. Press [MODE] until the display shows ‘ModE’ .
2. Press [ENTER] and use [UP] or [DOWN] to select the stand-alone ‘Soun’ .
3. Conrm your selection with [ENTER].
4. Press [ENTER] and select with [UP] and [DOWN] the desired microphone sensitivity (Su00
= Minimum - Su99 = Maximum).
If no further commands are entered, the display automatically returns to the main menu after
approx. 10 seconds and ‘Soun’ is displayed.
Setting the sound control
Operating
LED eect
28