User manual

You can choose between 9 dierent automatic shows (Au01 - Au09) and congure the pro‐
gram running speed (SP00 — SP99).
1. Press [MODE] until the display shows ‘ModE’ .
2. Press [ENTER] and use [UP] or [DOWN] to select the stand-alone mode ‘AUto’ .
3. Conrm your selection with [ENTER].
ð
The display is ashing.
4. Press [ENTER] to select the desired programme with [UP] and [DOWN].
5. Conrm your selection with [ENTER].
6. Press [ENTER] and use [UP] and [DOWN] to select the menu item ‘SPxx’ and conrm with
[ENTER].
7. Use [UP] and [DOWN] to select a programme running speed. You can set a value from 00
(minimum speed) to 99 (maximum speed). Conrm with [ENTER].
If no further commands are entered, the display automatically returns to the main menu
and the programme number is displayed.
Setting the auto mode
Operating
MiniSpider FX 8 × 3 W RGBW
27