User manual
Table Of Contents
Synchronous control of several devices of the same model with one DMX controller is possible
if you congure the devices with the same DMX start address and the same DMX channel
mode.
1. Press [MODE].
2. Press [UP] or [DOWN] until the display shows ‘ModE’ .
3. Conrm your input with [ENTER].
4. Press [UP] oder [DOWN] until the display shows ‘ChAn’ .
5. Conrm your input with [ENTER].
6. Use [UP] or [DOWN] to select the desired DMX mode (7-channel mode, 11-channel
mode, 17-channel mode).
Tables with the channel assignment of the various DMX modes can be found here in this
manual
Ä
Chapter 7.2.1 ‘Functions in 7-channel DMX mode’ on page 30,
Ä
Chapter 7.2.2
‘Functions in 11-channel DMX mode’ on page 32 and
Ä
Chapter 7.2.3 ‘Functions in 17-
channel DMX mode’ on page 34.
ð
If the device does not receive a DMX signal, the display ashes. When a DMX signal is
present, the display stops ashing.
Setting the DMX mode
Operating
MiniSpider FX 8 × 3 W RGBW
25