User manual

1. The remote control is in sleep mode by default. Press any button on the remote control
to activate it.
ð
The remote control is activated for 5 minutes. It can now receive and transmit radio
signals.
2. Connect the LED light to a USB power source.
ð
The group set on the remote control ashes.
3. To change the assignment of the group, press [GROUP] on the remote control.
After 5 seconds, the group assignment mode will automatically turn o. The device is
ready for operation in the selected group.
When delivered, the device is already paired with the remote control.
Installation and starting up
LED Puck ONE
13