User manual

The four spots (1 … 4, left to right) are pre-mounted on the T-bar. Only the stand is still to be
attached and the foot switch unit has to be connected.
A Locking screw for xing the inclination angle.
B Threads for attaching additional eects units or for hanging using the C-hooks.
C Locking screw for xing the spots on the T-bar and the horizontal orientation (dispersion
direction).
D Electrical connection of the spot at the T-bar (pre-mounted).
E 35 mm ange for mounting the T-bar on a stand (optionally available)
Pre-mounted spots
Installation
LED Pot System COB 40W RGB WW
17
LED Lighting Set