User manual

Press [Mode] repeatedly until the display shows ‘Set’ . Press [Setup]. Use [Up] | [Down] to select

the menu item ‘Cu.SE’ and conrm with [Setup].

Use [Up] | [Down] to select one of the following dimmer curves. The dimmer curve determines

how the brightness increases or decreases depending on the set DMX value.

Display Meaning

‘Cu-1’ Linear (proportional) course

‘Cu-2’ Quadratic curve with a at prole at the beginning and a

steep prole at the end (Square)

‘Cu-3’ Inverted quadratic curve with a steep prole at the

beginning and a at prole at the end (Inv Square)

‘Cu-4’ Non-linear curve with a distinctive at prole at the

beginning and the end (S-Type)

The below gure schematically shows the adjustable dimmer curves. Depending on the

selected DMX value (1) the device lights with a brightness (2) between 0 % and 100 %. Conrm

the selection with [Setup]. Press [Mode].

Dimmer curve

Operating

LED Pot SystemCOB 40W RGB WW