User manual

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. After a few seconds, the display

indicates that a reset is in progress. The device is then ready for use.

7.2 Main menu

Press [Mode] to activate the main menu and select an operating mode. Use [Setup] to select

further options. Use [Up] and [Down] to change the respectively displayed value. When the dis‐

play shows the desired value, press [MODE].

If you do not press any key for about 30 seconds, the display will be blanked. It will be reacti‐

vated to display the previously shown menu by pressing any button.

The set values are retained even when the device is disconnected from the mains power

supply.

Operating

LED lighting set