User manual

6.2 Operating mode ‘DMX’
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [Mode] repeatedly until the display shows ‘d.xxx’ .
2. Use [Up] and [Down] to assign a DMX address in a range from ‘d.001’ … ‘d.512’ to the
device and conrm with [Setup].
3. Press [Up] and [Down] to select the desired DMX mode:
Mode Display Highest possible DMX address
1-channel ‘1-ch’ 512
3-channel ‘3-ch’ 510
4. Conrm with [Setup].
Channel Value Function
1 0 … 255 Dimmer (0 % … 100 %)
Functions in 1-channel opera‐
tion
Operating
26
LED Pot Strobe 100
Stroboscope