User manual

7.5 Dimmer mode

Dimmer operation can only be activated when the unit is operating in stand alone mode or as

master in a master / slave combination. This setting is only relevant if the device is not con‐

trolled via DMX.

Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Colr’ . All LEDs light with the

set intensity. Press [Setup] and change the intensity of the four primary colours one by one as

desired:

n Red: ‘r.000’ … ‘r.255’

n Green: ‘g.000’ … ‘g.255’

n Blue: ‘b.000’ … ‘b.255’

n White: ‘u.000’ … ‘u.255’

Operating

LED PAR