User manual

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. After a few seconds the unit is

ready for use.

7.2 Main menu

Press [Mode] to activate the main menu. Press again [Mode] or [Up] | [Down] to call up other

menu items. To activate the respectively shown menu item, press [Setup]. Use [Up] and [Down]

to change the respectively displayed value. Changed values and settings will immediately take

eect. Press [Mode] to return to the previous menu.

If you do not press any button for about 15 seconds, the display will turn o. The set values are

retained even when the device is disconnected from the mains power supply.

Operating

LED Pot 12×1W RGBW, LED Pot 12×1W WH RGBW