User manual

Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘AUTO’ . The unit now operates
in automatic stand-alone mode.
Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Pro’ . Press [Setup] to then
select with [Up] | [Down] one of the programmes ‘Pr.01’ ‑ ‘Pr.14’ .
If you select ‘Pr.01’ , you can press [Setup] and then use [Up] | [Down] to select 15 programmed
colour patterns that are constantly lighting. Or you select ‘-OFF’ to blackout the unit. Press
[Setup] to then select with [Up] | [Down] the strobe frequency from ‘FS.01’ (slow) to ‘FS.99’
(fast). Select ‘FS.00’ for constant light.
Programmes ‘Pr.02’ ‑ ‘Pr.14’ oer preprogrammed colour sequences. After selecting one of
these programmes, press [Setup] to then select with [Up] | [Down] the speed of the colour
sequences from ‘SP.01’ (slow) to ‘SP.FL’ (fast). Press [Setup] to then select with [Up] | [Down]
the strobe frequency from ‘FS.01’ (slow) to ‘FS.99’ (fast).
Auto mode
Programme mode
Operating
LED PAR
28