User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2 Programme mode
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Pro’ . Press [Setup] and use
[Up] | [Down] to select one of the programmes ‘Pr.01’ … ‘Pr.14’ .
Operating
26
LED Pot 12×1W QCL RGB WW 15°, LED Pot 12×1W QCL RGB WW 40°
LED PAR