User manual

7 Operating
Connect the device to the power supply to start operation.
Press [MENU] to activate the main menu and select an operating mode. Use [UP] and [DOWN]
to change the respectively indicated value. Conrm the value with [ENTER].
If you don't press any button for about 20 seconds, the current setting will be automatically
applied and the display turns o. The set values are retained as long as the device is connected
to the mains power supply.
The following table shows the setting options.
Menu level 1 Menu level 2 Meaning
‘DMX’ ‘A001’ … ‘A255’ DMX mode setting
Auto programmes
‘Au11’ … ‘Au19’ Colour eect Red, increasing speed
‘Au21’ … ‘Au29’ Colour eect Green, increasing speed
‘Au31’ … ‘Au39’ Colour eect Blue, increasing speed
‘Au41’ … ‘Au49’ Colour eect White, increasing speed
‘Au51’ … ‘Au59’ Colour eect Amber, increasing speed
Operating
LED Diamond Dome MK II
23
LED Eect