User manual

In this mode the device is controlled via a DMX controller.

Press [MENU] to open the main menu.

Press repeatedly [MENU] or [UP] and [DOWN] to select the menu item ‘dNH’ and conrm with

[ENTER].

The display shows ‘d001’ ; press [ENTER]. Use [UP] and [DOWN] to select a DMX mode: 2-

channel ( ‘2Ch’ ) or 8-channel ( ‘8Ch’ ) and conrm with [ENTER]. Now you can set the number of

the rst DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a

value between 1 and 512 (the display shows ‘001’ … ‘512’ ). Conrm with [ENTER].

Make sure that this number matches the conguration of your DMX controller. The following

table shows the highest possible DMX address for the various DMX modes.

Mode Highest possible DMX address

2-channel 511

8-channel 515

To return to the main menu without making changes, press [MENU].

Operating mode DMX

Operating

LaserDerby