User manual

Perform the following steps to switch the device o:

1. Turn the safety key to the ‘OFF’ position to turn the laser beam o and remove the key.

Keep the safety key under control.

2. Disconnect the device from the mains.

6.2 Main menu

Press [MENU] to open the main menu.

Press repeatedly [MENU] or [UP] and [DOWN] to select one of the following menu items: ‘Aut’ ,

‘Sou’ , ‘CoL’ , ‘dNH’ , ‘SLA’ or ‘SYS’ . Press [ENTER] to open the selected menu.

Change the currently displayed value with [UP] and [DOWN] and conrm all new values again

with [ENTER]. To return to the main menu without making changes, press [MENU].

All settings are saved, even if you disconnect the device from the power supply.

Turning o

Operating

LaserDerby