User Manual Colour Burst MKll LED Flower Effect
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 28.07.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Colour Burst MKll LED Flower Effect
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source.
Features 3 Features Compact effect spotlight for large-area RGBW dot rotation effects. n n n n n 4 × RGBW-LEDs, each 2 W Direct control on the device or via the supplied infrared remote control Built-in automatic show programmes Sound control Power supply (USB-C) included For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Inserting the battery into the remote control Press the lock of the battery holder to the centre of the housing and pull out the battery holder like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing base of the remote control. Slide the battery holder back into the remote until it clicks into place. When shipping, the battery is already installed in the remote and protected against discharge by a transparent plastic foil.
Connections and operating elements 5 Connections and operating elements ö & Colour Burst MKII # ' CLOSE AUTO SOUND DC 5V ( $ MIC ) % Colour Burst MKll LED Flower Effect 15
Connections and operating elements 1 Mounting bracket 2 Locking screws for the mounting bracket 3 RGBW LEDs 4 Sensor for the signals from the included IR remote control 5 Safety cable eyelet 6 Mode selector [CLOSE] | activates operation via the supplied remote control [AUTO] | activates the Auto mode [SOUND] | activates the sound-control 7 [DC 5V] | connection socket for the supplied USB-C power supply 8 [MIC] | built-in microphone for sound control 16 Colour Burst MKll LED Flower Effect
Operating 6 Operating Connect the supplied USB-C power supply to the mains grid to start operation. After a few sec‐ onds the unit is ready for use. Automatic mode Slide the mode selector on the rear of the device to [AUTO] to enable the Auto mode. The pre‐ programmed automatic programmes are played automatically. Sound control Slide the mode selector on the rear of the device to [SOUND] to enable the sound control.
Operating Button labelling: Function [AUTO] Enabling / disabling the automatic mode [MUSIC] Enabling / disabling the sound control [ON/OFF] Blackout , , No function [A], [B], [C] No function [1] Selecting fixed colour red [2] Selecting fixed colour green [3] Selecting mixed colour green and blue [4] Selecting mixed colour red and green (30 %) [5] Selecting fixed colour blue.
Technical specifications Technical specifications 158 mm 7 Light source 4 × RGBW-LEDs, each 2 W Control Controls on the unit, infrared remote control Input connections Voltage supply Power consumption 10 W Voltage supply external plug-in power supply, 100 - 240 V Operating voltage 5V Battery remote control Lithium-ion button cell CR2025, 3 V Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D) 135 mm × 158 mm × 135 mm Weight 0.
Technical specifications Further information 20 Colour Burst MKll LED Flower Effect Similar construction Beam effect DMX control No Master/Slave No Remote control included Sound control yes Display No
Cleaning 8 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Notes 24 Colour Burst MKll LED Flower Effect
Notes Colour Burst MKll LED Flower Effect 25
Notes 26 Colour Burst MKll LED Flower Effect
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
