User manual

19 [R/L 3.5mm]
Line input, designed as 3.5 mm phone socket
20 [STANDBY ENABLE | DISABLE]
When the switch is in the position [ENABLE], the device will turn o after approx. 30 minutes without input signal. To
turn it then back on again, switch [POWER] o an on again.
21 [MIC IN]
Microphone/line input, designed as XLR chassis socket
22 [LEVEL]
Toggles the input between the microphone level (pressed) and the line level (not pressed)
23 [THRU]
Output with line level for other audio devices
24 [POWER]
Main switch. Turns the device on and o.
25 Plug for mains cable with fuse holder
Connections and controls
active speaker
18