User manual

5 [SD] SD card slot
6 [USB] USB connection socket
7 [GRAPHIC EQUALIZER] 5-band equalizer for adjusting the frequencies of the sum signal by +/- 12dB.
8 [LEVEL] Level controller for [ INPUT 3]
9 [VOLUME] Overall volume control
10 [POWER] Indicator LED. Lights up green when the device is connected to the power
supply and turned on.
11 [CLIP] Indicator LED. Lights up red when the signal level is too high, distortion
occurs due to clipping and the limiter is activated.
12 [MIX OUT] XLR chassis socket, 3-pin, for line-level signal output
13, 15 [INPUT 3] RCA socket pair (L / R) / 3.5 mm phone socket, unbalanced, for connecting
stereo input signal sources
14 [INPUT 1] [INPUT 2] XLR / 1/4" jack combo sockets for connecting a mixer or an instrument
16 [MIC / LINE] Input signal switch. With this switch you toggle between a microphone and a
signal source with line level.
Connections and controls
active speaker
18