User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.8 Device infos
1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘InFo’ .
2. Use [Up] | [Down] to select the menu item ‘Tenp’ and conrm with [Setup].
ð
The display shows the current device temperature status: ‘t-on’ (normal), ‘rt-E’
(error), ‘rt-H’ (overheated).
The device is not suitable for continuous operation. Once the display shows
‘rt-H’ , the device is overheated. Switch o the device.
3. Use [Up] | [Down] to select the menu item ‘Ver’ and conrm with the selection [Setup].
ð
The current version number is displayed.
4. Use [Up] | [Down] to select the menu item ‘bAt’ and conrm with the selection [Setup].
ð
The display shows the current status of the battery.
Operating
42
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
LED PAR