User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.7 Reset to factory defaults
1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Set’ .
2. Conrm the selection with [Setup].
ð
The display shows ‘-rSt’
3. Conrm the selection with [Setup] and use [Up] | [Down] to choose between ‘--NO’ (no
reset to factory defaults) or ‘-YES’ (reset to factory defaults).
Operating
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
41
LED PAR