User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.3 Operating mode DMX
This setting is only relevant if the device is controlled via a DMX controller.
1. Use [Mode] or [Up] | [Down] to select the menu option ‘d---’ .
2. Conrm the selection with [Setup].
3. Use [Up] | [Down] to assign a DMX address in a range from ‘d.001’ … ‘d.512’ .
4. Conrm with [Setup].
5. Press [Up] | [Down] to select the desired DMX mode:
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
6. Conrm with [Setup].
Operating
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
31
LED PAR