User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1 Two-part mounting bracket
2 Infrared sensor for receiving signals from an optionally available remote control.
3 Locking screws for the two-piece bracket
4 [DMX IN] | DMX input, designed as XLR panel plug
5 [DMX OUT] | DMX output, designed as XLR panel socket
6 [ON / OFF] | main switch. Turns the device on and o.
7 Display and function buttons.
[Mode] | opens the main menu or a submenu.
[Setup] | conrms a selected value.
[Up] | increases the displayed value by one.
[Down] | decreases the displayed value by one.
8 Connection for the external power supply
Connections and controls
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
25
LED PAR