User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3 Features
Compact, battery-operated LED spotlight as rst steps into wireless ambient lighting
n 12 × QCL LEDs RGB WW (1 watt each)
n Control via DMX, buttons and display on the unit as well as via IR remote control
n 14 preprogrammed automatic shows
n Operating modes:
– Sound control
– Automatic mode
– Programme mode
– Master/Slave
– DMX
n Compact plastic housing
– in black (item no. 490457 and 490458)
– in white (item no. 512678 and 512679)
n Two-part mounting bracket
n Optionally available accessories: Infrared remote control (item no. 354223), carrying bag
for four LED spots (item no. 406359)
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
15
LED PAR










