User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.5 Operating mode Dimmer
Dimmer operation can only be activated when the unit is operating in stand alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Colr’ . All LEDs light up
with full intensity.
2. Conrm the selection with [Setup].
3. Use [Up] | [Down] to successively adjust the intensity of the four basic colours as
required.
n Red: ‘r.000’ … ‘r.255’
n Green: ‘g.000’ … ‘g.255’
n Blue: ‘b.000’ … ‘b.255’
n White: ‘u.000’ … ‘u.255’
Operating
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
39
LED PAR