User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Channel Value Function
8 0 No function
1 … 255 Stroboscope eect (0 % to 100 %)
7.4 Operating mode Slave
This setting is only relevant if the device is not controlled via DMX.
1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘SLAv’ .
2. Conrm the selection with [Setup].
ð
The device now operates in slave mode and follows all processes of the controlling
master device.
Operating
38
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
LED PAR