User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1 [ON/OFF] | turns the device on and o.
2 [AUTO] | activates the ‘Automatic‘ mode.
3 [PRG] | activates the operating mode ‘Preprogrammed automatic show’. Select the desired programme with [+] and
[–].
4 [SOUND] | activates the ‘Sound-control‘ mode. Set the sensitivity of the built-in microphone with [+] and [–].
5 [SPEED] | activates the setting mode for the programme speed. Adjust the speed using [+] and [–].
6 [STROBE] | activates the setting mode for the Strobe speed. Adjust the speed using [+] and [–].
7 [+] | increases the set value.
8 [–] | decreases the set value.
9 [Dimming] | activates the dimming function for xed colours. Set the value for each xed colour using [+] and [–].
10 [0 … 9] | numeric buttons for direct selection of a xed colour.
11 [R], [G], [B], [A], [W] | buttons to select the colour shade in dimmer mode.
Connections and controls
LED Pot QCL RGB WW 15°, LED Pot QCL RGB WW 40°
27
LED PAR