User Manual

OPERATION PHW-IOM-2013-0214 SECTION 3

3-20

5. Back out to the Con gure Screen and press Sensor Con guration. The

“sola” password will need to be entered. Press the Outdoor temperature

source and choose EnviraCOM outdoor source. See Figure 49.

NOTE: ´ The 1ea (KIT) 2-40-001072, outdoor sensor and Interface Module is

required, wired to the Sola base ECOM terminals 1,2, and 3.

FIGURE 49 - SENSOR CONFIGURATION

6. Back out to the Con gure menu and press Verify and complete the

veri cation process. See Figure 50.

FIGURE 50 - VERIFICATION

! WARNING

All information in this manual is for

reference and guidance purposes,

and does not substitute for required

professional training, conduct, and strict

adherence to applicable jurisdictional/

professional codes and regulations.

Non-Fulton product information is

for reference purposes only. No Fulton

document may substitute for full review

of documentation available from the

component manufacturer.