Data Sheet

Fullpower Labs Proprietary Information
Page 19 of 22
This radio module must not installed to co-locate and operating simultaneously with other radios in host
system , additional testing and equipment authorization may be required to operating simultaneously with
other radio.
The module is designed to comply with the FCC and ISED statement . FCC ID:2AF2O-FPM20, IC: 20700-
FPM20. The host system using this module, should have label indicated it contain modular’s FCC ID:
2AF2O-FPM20. And should be contain IC: 20700-FPM20
Exposure to Radio Frequency Energy
This equipment complies with radiation exposure limits set forth in the FCC’s OET Bulletin 65 and Industry
Canada’s RSS-102 standard for an uncontrolled environment. This equipment should be installed and operated
with minimum distance of 20cm (about 8 inches) between the radiator and your body. This equipment must not be
co-located or operating in conjunction with any other antenna or transmitter.
OEM statement
The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmitter must be labeled
with its own FCC ID number. This includes a clearly visible label on the outside of the final product enclosure
that displays the contents shown below. If the FCC ID is not visible when the equipment is installed inside
another device, then the outside of the device into which the equipment is installed must also display a label
referring to the enclosed equipment
The end product with this module may subject to perform FCC part 15 unintentional emission test requirement
and be properly authorized.
This device is intended for OEM integrator only