Use & Care Manual
EN
8
6 - Oven Modes
CAVITY STYLES
Thermal Cavity  Convection Cavity Double Convection Cavity
True Convection Roast Dehydrate
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 325 °F (165 °C)
Convection Bake cooks with heat from a 
ring element behind the back wall of the 
oven. The heat is circulated throughout 
the oven by the convection fan.
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 350 °F (175 °C)
Is cooking with heated air. Both the 
upper and lower elements cycle to 
maintain the oven temperature.
Set temperature:
from 120 °F (50 °C) to 160 °F (70 °C)
(preset 140 °F (60 °C)
Dehydrating is similar to convection 
cooking but holds an optimum low 
temperature while circulating the heated 
air to remove moisture slowly for food 
preservation.
Convection grill Broil Pizza
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 450°F (230°C)
Convection Broil combines the intense 
heat from the upper element with the 
heat circulated by the convection fan.
Set temperature:
from L1 to L5
(preset L3)
Broiling uses intense heat radiated from 
the upper element.
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 325 °F (165 °C)
CLASSIC PIZZA (if present)
Recipe:
(preset 590 °F (310 °C)
Is a special cooking mode with heated 
air. The lower elements cycle to cook 
Pizza.
Convection Roast Convection Broil Warm Defrost
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 325 °F (165 °C)
Convection Roast uses the upper and 
lower elements and convection fan.
Set temperature:
from 80 °F (25 °C) to 120 °F (50 °C)
(preset 100 °F (40 °C)
Warm Plus
Set temperature:
from 130 °F (55 °C) to 210 °F (100 °C)
(preset 170 °F (75 °C)
Bake
Set temperature:
from 170 °F (75 °C) to 550 °F (290 °C)
(preset 350 °F (175 °C)
Bake, Warm and Warm Plus use the 
lower elements to keep foods warm.
Does not used any heating element, 
only the convection fan is used to defrost 
foods.
The following illustrations give an overview of what happens in the oven with each mode setting. The arrows represent the location 
of the heat sources during specific modes. The lower element is concealed under the oven floor.










