Use & Care Manual
ENGLISH
15
Use & Care Manual
Turn the mode knob into the desired position, the 
clock display shows On for a few seconds. The oven 
will work for a maximum time (12hours). Depending 
on the oven model, the number and type of available 
functions can be different.
If the clock display function is active the symbol 
appears (it doesn’t appear in light position).
Turn the Temp & Time selector and set the desired 
oven temperature. The control offers a PRESET 
temperature per every cooking mode or a full range 
EHWZHHQ 0,1 DQG 0$; WR EH DGMXVWHG E\ KDQG
Check the value on the display after having selected 
the temperature.
The temperature appears on the clock display when 
the Time & Temp selector is pushed or when a new 
function has just been selected.
As soon as the oven starts, the preheat led (indicated 
by the bars) on the bottom of the clock display starts 
ÀDVKLQJDQGEHFRPHVVWHDGLO\RQZKHQWKHSUHKHDW
ends with a beep.
Turn the mode selector to ZERO (OFF) position to 
stop any activity, the display will show OFF for a few 
seconds.
Setting an automatic oven function
After having selected a function as described before, 
the control can be programmed in order to set timed 
cooking activities. The time program remains active 
HYHQLIWKHIXQFWLRQLVFKDQJHGH[FHSWLRQS\URO\VH
7KHIROORZLQJSRVVLELOLWLHVDUHDYDLODEOH
1  Timed cooking setting the cooking time (duration).
2  Timed cookitng setting the end of cooking time 
(stop time).
3  Delayed cooking setting duration and stop time.
Push the knob in order to toggle between cooking 
duration (cook time) and end of cooking time (stop 
WLPH WKH ZRUGV ³GXU´ RU ³(QG´ DUH GLVSOD\HG
respectively.
7XUQWKHNQREOHIWULJKWWRHGLWWKHGXUDWLRQRUWKHVWRS
WLPHZKHQWKHSURSHUZRUGLVGLVSOD\HG
1.  When the word dur is displayed, the control shows 
30’ as the standard cooking duration. Turn the knob 
OHIWULJKWLQRUGHUWRVHWWKHDFWXDOO\GHVLUHGFRRNLQJ
time in a range between 0 and 240 minutes. The 
GLVSOD\ZLOOÀDVKdur and its value alternatively for 
a few seconds then it will show the time of day, 
the pot symbol and the 
 letter to indicate that a 
timed cooking is active. The end of cooking time is 
updated automatically.
2.  When the word End is displayed, the control shows 
the current time as the initial stop time. In order to 
set the actually desired end of cooking time in a 24 
KRXUVUDQJH
 7XUQWKHNQREOHIWULJKWWKHKRXUVÀDVK
 0RGLI\WKHÀDVKLQJKRXUVYDOXHWXUQLQJWKHNQRE
OHIWULJKW
-  Push the knob to switch back and forth between 
hours and minutes or wait a few seconds until 
WKHPLQXWHVÀDVK
 0RGLI\WKHÀDVKLQJPLQXWHVYDOXHWKHNQREOHIW
right.
- Wait until the new End of Cooking time value 
VWRSVÀDVKLQJ
 7KHGLVSOD\ZLOOÀDVK(QGDQGLWVYDOXHDOWHUQDWLYHO\
for a few seconds then it will show the time of day, 
the 
 symbol and the   letter to indicate that a 
timed cooking is active. The cooking duration is 
updated automatically.
3. Repeat the same operations of point 1 then push 
the knob until End appears. the control shows the 
³FXUUHQW WLPH  FRRNLQJ WLPH´ DV WKH LQLWLDO VWRS
time. It’s not possible to lower the end of cooking 
time below this value. In order to set the actually 
GHVLUHGHQGRIFRRNLQJWLPHLQDKRXUVUDQJH
7XUQWKHNQREOHIWULJKWWKHKRXUVÀDVK
0RGLI\WKHÀDVKLQJKRXUVYDOXHWXUQLQJWKHNQRE
OHIWULJKW
- Push the knob to switch back and forth between 
hours and minutes or wait a few seconds until the 
PLQXWHVÀDVK
0RGLI\ WKH ÀDVKLQJ PLQXWHV YDOXH WXUQLQJ WKH
NQREOHIWULJKW
- Wait until the new End of Cooking time value 
VWRSVÀDVKLQJ
 7KHGLVSOD\ZLOOÀDVK(QGDQGLWVYDOXHDOWHUQDWLYHO\
for a few seconds then it will show the time of 
day and the 
 letter to indicate that a delayed 
cooking has been programmed. As soon as the 
delay time expires, the oven starts and works for 
the programmed cooking time.The 
 symbol is 
displayed.
At the end of any timed activity the control shuts down 
the oven, the buzzer sounds a warning sequence (two 
short beeps repeated every 3 seconds) to recall the 
user attention, for a maximum time and makes the 
time related icons (
, ÀDVKRQWKHGLVSOD\3XVK
the knob to silent the buzzer and reset the warning 
message.
Turn the mode selector to ZERO (OFF) position 
before reusing the oven.
Setting an oven function manually










