Use & Care Manual
ENGLISH
10
Use & Care Manual
Control panel description
The oven control panel is made with one display and 
two knobs.
- Time & Temperature display.
- Time & Temperature knob (Push & Shuttle).
0RGHRYHQIXQFWLRQVNQRE
The push & shuttle knob is mainly for clock or 
temperature setting and automatic time functions 
programming. Select the desired item by pushing the 
knob.
Electronic control
Programming time functions
At every power-up, the control shows the time of day 
EOLQNLQJVHWDW
$0
 as the initial value. The time 
increases every minute. The only possible action is 
the “Clock Regulation”, all other oven operations are 
inhibited.
,QJHQHUDOWXUQWKH7HPS7LPHVHOHFWRUOHIWRUULJKWLQ
order to edit the values and modify them by steps; hold 
WKHNQRERQWKHOHIWRUULJKWWRIDVWHQWKHGHFUHDVH
increase operations.
Setting the time of day
7KHWLPHRIGD\LVDOZD\VGLVSOD\HGLQWKH
$030
hours format. Hours and minutes are set separately. 
In order to set the time of day, mode selector must be 
LQ=(52SRVLWLRQWKHNQREDFWVRQWKHWLPHRIGD\
by default.
 7XUQWKHVHOHFWRUOHIWULJKWWKHKRXUVÀDVK
 0RGLI\WKHÀDVKLQJKRXUVYDOXHWXUQLQJWKHVHOHFWRU
OHIWULJKW
- Push the Temp&Time selector to switch back and 
forth between hours and minutes.
 0RGLI\WKHÀDVKLQJPLQXWHVWXUQLQJOHIWULJKW
- After a few seconds the whole time of day value 
VWDUWV ÀDVKLQJ ZDLW XQWLO WKH QHZ WLPH RI GD\ LV
steady.
Push the knob to toggle between the time of day and 
the minute minder and check the set values. The clock 
is selected by default while the 
 symbol appears 
when the minute minder is displayed.
Setting the minute minder
When the 
V\PEROLVGLVSOD\HGWXUQWKHNQREOHIW
right in order to set the timer value.
The standard value is 30 minutes, it’s possible to 
modify it in the range between 0 and 240 minutes.
7KLVWLPHUKDVQRLQÀXHQFHRQWKHRYHQDFWLYLWLHVDQG
can be set also when the oven is off. The time of day 
is displayed with priority in any case, the 
 symbol 
shows the minute minder is active.
When the time expires, the 
V\PEROÀDVKHVDQGWKH
buzzer sounds a warning sequence (two short beeps 
repeated every 3 seconds) to recall the user attention. 
Push the knob to stop it.
The buzzer stops in any case after a time-out.
Buzzer volume
The buzzer volume can be set turning the Time&Temp 
knob to the left when the control is in light mode. At any 
detents the buzzer sounds a double beep, selecting 
the volume out of three available levels. The buzzer 
PXVWDOZD\VEHVLOHQWEHWZHHQDQG
Temperature Unit Measurement
7RVHOHFW)DKUHQKHLWRU&HOVLXVSUHVVNQREWZLFH
ZKHQ WKH GLVSOD\ VKRZV  ) RU & WXUQ  NQRE WR
FKDQJH WKH XQLW RQ PHDVXUHPHQW SUHVV DJDLQ 
NQREWRFRQ¿UP
TEMP & TIME
MODE










