Owner's Manual

10
11
GB
Timer touch control
Setting the clock
Fig. 1
“Auto” and “0:00” will start flashing
when the unit is switched on for the first
time. To set the clock, press the central
button for about 3 seconds. When
appears, press “+” or “-“ to set the
correct time.
Wait until a beep tells you that the clock
has been set (figure 1).
To set the time at a later stage, press
“+” and “-” together for 3 seconds and
then adjust the clock as described
above.
Minute counter
Fig. 2
As this minute counter does not control
the oven, when it finishes counting the
oven will continue to work.
To set, press the central button for 3
seconds until appears (figure 2).
Press “+” and “-” to set the required
time.
To set the minute counter at a later
stage, press the central button for 3
seconds and adjust as described
above.
The minute counter beeps when it
finishes counting. To disable it, press
any button.
Cooking time
Fig. 3
This is a semi-automatic cooking
function. It can be used to set cooking
times.
Press the central button for 3 seconds.
Then press it again until “dur” appears
(figure 3). Press “+” and “-” to set the
required cooking time.
End of cooking time
Fig. 4
The end of cooking time can also be
set.
Press the central button for 3 seconds.
Press the central button twice
consecutively and wait for “End” to
appear (figure 4). Press “+” and “-” to
set the required end of cooking time.
The oven will work in the set mode and
at the set temperature until the end of
cooking time.