Installation Manual
EN
25
•  Purge air from the water lines by running the ‘Manual 
Clean’ function from the Menu->Functions->Water Filter 
options. You may need to complete this sequence several 
times until you stop hearing air sputtering from the ice 
maker fill tube (Refer to your Use & Care Manual).
•  Once you are satisfied that the system is purged of air 
switch the Ice Maker on by touching the 
 button which 
will illuminate.
NOTE
If the Fresh Zone drawer is configured as a Fridge or a 
Fresh compartment the ice maker will be disabled. Default 
mode for the Fresh Zone drawer is Freezer.
•  For further information about the appliance operation, 
refer to the User Manual.
NOTE
If at the first start - up the message Stand by does not 
appear, but other messages appear, such as Fridge too 
warm, Freezer too warm, or sound signals are activated, 
it means that the appliance has already started the 
cooling process. If this is the case, deactivate any possible 
acoustic signals by pressing the Alarm button, close the 
door and wait until the set temperature is reached.
IMPORTANT
It is necessary to let the unit reach the correct temperature 
before foods are stored inside.










