Installation Manual

Side and central proﬁles mounting:

Appliance

Wall or furniture

6,5 (¼”) 6,5 (¼”)

20 (¾”)

22 (7⁄8”)

22 (7⁄8”) 22 (7⁄8”)

6,5 (¼”)6,5 (¼”)

18 (¾”)

44,4 (1 ¾”)

18 (¾”)

13 (½”)

A - Proﬁle connection trim (screws for ﬁxing to cabinetry not

included)

B - Proﬁle trim cover

C - plastic connecting brackets

D - Connecting element

E - Aluminum frameI

NOTE

In all cases, if installing into an opening that is wider than

the width speciﬁed in this manual, the side proﬁle trims

/ frames can be removed, shimmed and reattached to

effectively widen the appliance to match the width of the

opening allowing for a perfect looking installation without

gaps. Take this into account when making integrated

panels for a wider opening to ensure your desired gap /

reveal around the panels.

6.3 Maximum cabinet depth over “Integrated”

refrigerator with single door panel

It is possible that the design of the kitchen and, in particular,

of the niche where the “Integrated” refrigerator is going to

be ﬁtted includes a cabinet right above the refrigerator itself

that must be closed with the same panel mounted on the

Integrated refrigerator door.”

In this case, the total depth of the cabinet without the door

(above the refrigerator) must not exceed the total depth of the

refrigerator itself [ 1 ].

This will allow the panel attached to the refrigerator door

to open correctly without interference during its rotation up

to 105°.

585 (23”)

650 (25 ⅝”)

47 (1 ⅞”) + front panel thickness